The EK425L is operated with one hand, leaving the other hand free to position the cable and connector. The crimping jaws open wide to fit easily over connectors. To help prepare for a crimp, the jaws can be jogged closed until they just grip the connector, allowing the operator to position the cable in the connector before finishing the crimp. The EK425L will complete about 325 crimps per battery charge on 4/0 AWG splices. When a crimp is fully completed, the EK425L signals the operator by automatically opening the jaws. It is then ready to make the next crimp. And, when the crimping jaws need to be opened before a crimp is complete, the operator can simply push a button on the back side of the tool. Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications.
Vendor Item #:
EK425LDO12
Tools Category:
Hand Tools
Tools Subcategories:
Crimping Tools
Electrical Category:
Tools
Electrical Subcategory:
Cutting Crimping And Punching
Electrical Subtype:
Wire Lug Crimping Tool
Crimping Capacity:
Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
Crimping Force:
6.000 TON (54.000 KN)
Handle Type:
Cushioned Grip Ergonomic
MsdsURL:
http://ww1.actiocms.com/?f05bad6d-5855-11e4-bc08-c81f66f24c6b
RoHS Compliance:
Contact Manufacturer
Manufactured By:
Greenlee
